Solid Ground Curing
Developed by Cubital, solid ground curing (SGC) is somewhat similar to stereolithography (SLA) in that both use ultraviolet light to selectively harden photosensitive polymers. Unlike SLA, SGC cures an entire layer at a time. Figure 5 depicts solid ground curing, which is also known as the solider process. First, photosensitive resin is sprayed on the build platform. Next, the machine develops a photomask (like a stencil) of the layer to be built. This photomask is printed on a glass plate above the build platform using an electrostatic process similar to that found in photocopiers. The mask is then exposed to UV light, which only passes through the transparent portions of the mask to selectively harden the shape of the current layer.Figure 5: Schematic diagram of solid ground curing.
After the layer is cured, the machine vacuums up the excess liquid resin and sprays wax in its place to support the model during the build. The top surface is milled flat, and then the process repeats to build the next layer. When the part is complete, it must be de-waxed by immersing it in a solvent bath. SGC machines are distributed in the U.S. by Cubital America Inc. of Troy, MI. The machines are quite big and can produce large models.
Related Articles
- STL File Conversion
- Solid Modeling
- Rapid Prototyping Developmets
- The Term "Rapid Prtotyping" what does it mean
- What is the Rapid Prototyping Process?
Attachments
No attachments were found.Visitor Comments
No visitor comments posted. Post a commentPost Comment for "Solid Ground Curing"
To post a comment for this article, simply complete the form below. Fields marked with an asterisk are required.Would you like to...
User Opinions
100%
0%
(1 vote)