http://knowledge.stereolithography.com/activekb en-us http://knowledge.stereolithography.com/activekb ActiveKB NX chris.b@stereolithography.com Mon, 06 Sep 2010 10:57:46 CDT 20 http://knowledge.stereolithography.com/activekb/questions/71/ Class 1A“Strip & Ship” Parts are taken off the tray and cured with minimal finish, removing the supports for quickest turnaround and lowest cost. For parts where cost is the p ... Chris Breault Thu, 06 Dec 2007 03:41:46 GMT http://knowledge.stereolithography.com/activekb/questions/63/ Pricing for stereolithography models is a complicated process and has many variables. However there are six main variables all pricing follows. These variables are: VolumeBounding ... Chris Breault Sun, 02 Dec 2007 20:49:17 GMT http://knowledge.stereolithography.com/activekb/questions/69/ If you subscribe to stereolithography.com monthly newsletter or except any of stereolithography.com's promotional offers and you need to read this section. It is very important that you enter you ... Chris Breault Fri, 30 Nov 2007 03:58:25 GMT http://knowledge.stereolithography.com/activekb/questions/68/ When it comes time to select material for your prototype you have many choices. These choices can be driven by the and function of your device. If you have a production material in my we have ma ... Chris Breault Fri, 30 Nov 2007 03:50:22 GMT http://knowledge.stereolithography.com/activekb/questions/64/ Below is an example of when orientation would be critical. Pictured is a section view of the part that exposes the internal features. These features are cylindrical and will have a meeting featu ... Chris Breault Thu, 29 Nov 2007 20:40:51 GMT